Phone Case Dual Pokemon Go Plus Mod DIY mahler83, 2018-09-092018-10-29 I am currently running 2 accounts of Pokemon Go on my Xiaomi Mi6 using MIUI’s “Split Screen” and “Dual Apps”. Also, I am using 2 Pokemon Go Pluses to automatically spin pokestops or catch pokemons. But constantly reminding myself to carry PG pluses and keeping them near my phone was quite annoying, and the annoyingness grew big enough for me to mod my PG pluses. Acknowledgement: The original concept of the “Phone Case Mod” was developed by Pokemon Go User Ramus9. Opened up my Pokemon Go Plus You need a medium-sized phillips screwdriver and also a quite rare tripoint screwdriver (often called TP head or Y-screw) to open up the case. You won’t need the case anymore so if you have trouble acquiring a TP screwdriver, you can just break-open the case. Also, if you are looking for thin, insulated wires “Wrapping wire” is what you are looking for. ex: https://www.amazon.com/dp/B07D22H71K/ref=cm_sw_r_tw_dp_U_x_trDLBbTBAG62H Blue points: connect two points for the “Autocatch Mod”Red thing: remove to make flat enough to fit in the phonecase I’ve had my PG+ Autocatch Mod done already, so in case you are trying to do it, get rid of the vibration motor and just connect the two dots with a wire and you’re done.I’m not sure what the red thing is doing (probably just a structure to support, I guess). In order to make the circuit board flat enough to fit in the phone case, I simply removed it with a set of pliers. Made flat now. Remove the prominent pieces. Now let’s flip over. The poles that connect to the battery are sticking out. I used nippers and pliers to remove the prominent pieces. Wires connected Now, connect wires for the battery. 2 batteries and 2 PG+ boards embedded I connected the batteries to the wires with a piece of aluminum foil and clear tape, since the batteries need to be replaced every few months. (Removing the vibration motor extends the battery life 3-4 times, in my experience)Case I used: https://www.aliexpress.com/item/HOLAZING-Wholesale-Armor-Thick-Heavy-Protection-Anti-Drop-PC-TPU-Full-Coverage-Case-for-Xiaomi-Mi6/32846683047.html View from the other side I had to carve the inside of the outer plate to make more space for the batteries and PG+ boards.Honestly, carving the silicone inner case was the toughest part of this whole operation. Two buttons I carved two holes on the outer plate and pegged in a piece of plastic to give access to the button. (Despite the Autocatch Mod, you still need to press the button once when you connect) So, this is my new phone case in action!https://youtu.be/LVbxvHRTSHc Share this:FacebookX Gaming PokemonGo DIYPokemonGoPokemonGo Plus
PokemonGo 포켓몬고 체육관 시스템 업데이트 2017-06-192017-09-06 1. 체육관에 아이템 보급 기능 추가 – 체육관에 포켓스탑 기능이 추가된 것이라고 보면 된다. 포켓스탑 연속보너스로도 인정됨 – 집 근처에 포켓스탑이 없이 체육관만 덩그러니 있던 사람들에게 도움이 될 듯 2. 체육관 순서/prestige 시스템 변화 – 슬롯이 10칸에서 6칸으로 감소 – 체육관에 같은 종류의 포켓몬 중복 배치 불가능. 해피너스… Share this:FacebookX Read More
Gaming 포켓몬고 영어-한글 헷갈리는 용어들 2018-08-132019-07-23 포켓몬고를 하다보면 한글과 영어 용어들이 미묘하게 어긋나면서 헷갈리는 것들이 있다. 폰의 OS가 영어로 세팅되어있어 영어버전으로 플레이 하는데, 한글버전으로 플레이하는 사람들과 의사소통에 은근 지장이 생긴다.헷갈리는 것들 몇가지 적어봄. 반짝반짝 포켓몬 = Lucky pokemon럭키 = Chansey이로치, 색이 다른 포켓몬 = Shiny pokemon가장 문제가 되는 것은 최근에 생긴 반짝반짝 포켓몬이다(강화에 모래가 절반 드는… Share this:FacebookX Read More
PokemonGo 랄토스 커뮤니티데이 추천 전략 2019-08-032019-08-03 이번 랄토스(Ralts) 커뮤니티데이는 다른 커뮤니티데이와 달리 고민해볼 여지가 많다.가디안(Gardevoir)과 엘레이드(Gallade)를 우선 비교하면, – 둘은 스탯(종족값)이 같고– 공통 속성으로 에스퍼(psychic)– 가디안은 추가속성 페어리– 엘레이드는 추가속성 격투그러면 가디안과 엘레이드의 에스퍼, 페어리, 격투 3가지 속성에 대해 고민해보면 된다. 에스퍼 타입 (공통)뮤츠(Mewtwo), 에브이(Espeon), 후딘(Alakazam)이 에스퍼 타입 중에서 실질적인 Top3를 차지한다. 싱크로노이즈(Synchronoise)를 익히더라도 Gardevoir와 Gallade는… Share this:FacebookX Read More